Subscribe to the newsletter

Subscribe to our newsletter to receive the latest
news in your inbox!

Thanks, your address has been added
The package contains:

1. Hair color cream in a tube, 50ml
2. Color developer in a bottle with applicator, 75ml
3. Post color hair conditioner in 2 sachets of 15ml
4. Disposable gloves glued on the back of the instruction leaflet
5. Ιnstruction leaflet


1. Take off all your jewelry 3. Wear the gloves provided during the entire color application stage
2. Protect your clothes covering your shoulders with a towel. 4. Apply a small amount of oil around the hairline to avoid staining the skin in that area


1. For best results, make sure that room temperature during application is not below 20oC 3. Conduct the sensitivity test 48 hours before application to check your personal tolerance to the product
2. For longer-lasting color, don’t shampoo hair more than once for 24 hours after application 4. Avoid hair mask & oil treatments one week before and one week after hair coloring.

• If this is the first time you color your hair
• If you haven’t colored your hair for several Months

Protect clothes by putting a towel over your shoulders. Remove any jewellery and wear the gloves provided during the entire colour application stage. Apply a small quantity of natural oil around the forehead in order to avoid coloring the skin
Pour the entire content of color cream tube (A) into the color developer bottle (B). Mixing ratio 1:1.5
Replace the cap on the bottle (Β) and shake until the mixture is smooth. After completing the mixture, cut the tip off the applicator at the end of the cap and start the application IMMEDIATELY on DRY hair.
Section by section, apply the coloring mixture on the roots, using the tip of the applicator bottle to separate the strands. Massage gently each section. Continue by distributing the remaining product evenly throughout the hair.

Leave it on for 30 minutes.

In case of stubborn grey hair, it is recommended to leave the product for 10 extra minutes (total application time on the roots: 40 minutes).

The mixture does not drip.
...Read more ...Read Less
When the processing time is over, wear the gloves and massage directly on the scalp without adding any water, paying special attention to the outlines and the hairline in order to remove any stains.

Then, add a small amount of warm water and continue massaging to allow the mixture to turn into foam.
...Read more ...Read Less
Rinse hair thoroughly until the water runs clear and then wash with a gentle shampoo.
Apply the first sachet of post color hair conditioner from roots to ends. Massage into hair thoroughly to enable the ingredients to penetrate and seal the color. Leave the conditioner on for 3 minutes and then rinse thoroughly.
Apply the second sachet of conditioner after 15 days to enhance shine.

On a monthly basis we recommend root touch-ups only. This will allow to avoid a light roots/dark ends effect occurring with repeated applications.

1. Follow steps 1 to 3.
2. Apply the mixture to the roots using the tip of the applicator bottle to separate the strands (B).
Leave it on for 30 minutes.
3. OPTIONAL STEP ONLY IF THE COLOR HAS FADED ON YOUR LENGTHS AND ENDS: apply the remaining mixture on the rest of your hair. Leave it on for extra 5-10 minutes.
4. Complete the process by following steps 5 to 8.

The final hair color is the result of the combination of the existing hair color base, whether natural or colored, and the color shade you have applied. If you use half of the hair color, save the rest of the color cream and developer separately for the next application. The color must be applied immediately after mixing. Any leftover mixture cannot be reused. Make sure that you follow the correct mixing ratio (1 : 1,5). Any other mixing ratio may alter the color result. If your hair is permed or chemically straightened, wait 15 days before coloring. For the daily care of your hair and to prolong the shine and vibrancy of hair color, we recommend using APIVITA's Color Protect line with sunflower and honey (shampoo, conditioner, leave-in conditioner, mask).
For a successful result and an effective coverage of grey hair, it is very important to apply the dye in SUFFICIENT quantity, making FINE sections. If you have highlighted hair, more than one application may be necessary to achieve a uniform color. If you have colored your hair with henna or any other semi-permanent color, wait until the color is completely gone before coloring, in order to make sure that you achieve a uniform result when you color your hair again.
IMPORTANT: Hair colorants can cause severe allergic reactions. This product is not intended for use on persons under the age of 16. Temporary “black henna” tattoos may increase your risk of allergy.


You have a rash on your face or sensitive, irritated and damaged scalp. You have experienced a reaction to a temporary “black henna” tattoo in the past.
You have ever experienced any reaction after coloring your hair.
A preliminary sensitivity test (patch test) must be done 48 hours before every application, even if you have used hair coloring products of this or another brand in the past. Lack of any reaction to this test is no guarantee that an allergic reaction will not occur as a result of a future sensitization.


Purpose of the test: to test individual’s tolerance of the product on the skin. Mix approximately 5 g of color cream with approximately 7,5 g of developer in a small plastic or glass vial. Repeat the application 2 or 3 times, allowing the mixture to dry in between each time. If irritation, inflammation or itching occurs during this time, do not apply the product. If skin problems arise, such as itching, irritation, swelling or the presence of blisters after coloring or in the following days, seek immediate medical attention.
Thoroughly clean a small area of the skin behind the ear or on the forearm (1 square cm) with alcohol and a piece of cotton. Apply the mixture on the prepared area (1 square cm) with a piece of cotton or with a small spatula. Leave it on for 48 hours without washing, then rinse gently with water. You may use the product if no allergic reaction occurs. If the skin irritation spreads rapidly, and you feel weak or dizzy or have difficulties in breathing and/or there is swelling of the face/eyes, rinse immediately with water and seek prompt medical attention.
The color cream may contain phenylenediamines (toluenediamines).
The developer contains hydrogen peroxide.


Avoid contact with eyes and skin. In case of accidental contact with skin or eyes, rinse immediately with plenty of water. Wear suitable, disposable gloves during all the preparation, application and final rinsing phases. Keep out of reach of children. Do not use on children.
Do not use to dye eyelashes or eyebrows. Failure to follow these instructions may cause blindness. Rinse hair well after application.


Rinse eyes immediately and thoroughly with water if the product (developer or the colour mixture) comes into contact with them. Remove any contact lenses before flushing eyes. Should irritation persist, consult a specialist. Do not inhale or ingest the product. Do not use on hair that has been previously color-treated with henna or metallic dyes. Remove all metal objects from hair before coloring. Do not use metallic instruments. Do not perm hair 15 days before or after a color treatment. Apply the product in a well-ventilated area. Do not exceed the recommended processing times. Keep the product in a cool place, away from sources of heat and out of the light. Use immediately after mixing. Do not keep any leftover product. Never leave the mixture in a closed applicator.

Follow Us:

added to cart


Continue shopping


View cart & checkout